RL-R19

Portable spectrum analyser

RL-R19
RL-R19
DAQ system and spectrum analyzer is intended for measuring, registering and analyzing vibration data and other physical processes.

RL-R19 enables the user to:

  • acquire and transfer data from vibration sensors;
  • examine the vibration condition of machines, mechanisms, mechanical constructions, bearings, gearings etc. detect various;
  • defects of machines, mechanisms, mechanical constructions, bearings, gearings etc.;
  • balance rotors of machines and mechanisms.

The principle of building up the software of RL-R19 devices enables forming a set of functional options intended to solve specific problems.

The only obligatory option is “Basic Software”, other options may be combined in any configuration.

The following options are available:

  • Basic software (including making and viewing recordings).
  • Part-octave analysis.
  • Statistic analysis.
  • Balancing.
  • Signal generator.
  • Repeater.
  • Automatic measurements.
  • Filtration.
  • Shock analysis.
  • Synchronization.

Software

VisAnalyser

VisAnalyser

VisAnalyser v0.7 (x86)
See all versions

Specifications

  • Number of measuring channels
    4÷8
  • Tacho-channel
    1
  • Range of measure signals
    ±20 V
  • Mode of measuring channels
    IEPE, linear, single-ended
  • Logical inputs and outputs
    4 inputs and 4 outputs
  • Screen resolution
    640×480 pixels
  • Screen diagonal
    5.7 inches
  • Battery capacity
    ≥ 8000 mAh
  • Protection
    IP65

Input

  • Sensor type
    IEPE, linear
  • FRF non-linearity (1kHz) in the range of 1 ÷ 40000 Hz
    ≤ 2 dB
  • FRF non-linearity (1kHz) in the range of 1 ÷ 60000 Hz
    ≤ 5 dB

Output

  • Frequency range
    DC, 0.1÷60000 Hz

Other

  • DAC/ADC resolution
    24 bits
  • Temperature range
    -30 ÷ +60 °C
  • Dimensions
    260×152×55 mm
  • Weight
    2.3 kg
  • Power supply
    Autonomous (> 8 hours) 230 V AC 12-36 V DC V

Low Voltage Directive 2014/35/EU

Electromagnetic Compatibility Directive 2014/30/EU

Program interface

Frequently Asked Questions (FAQ)

Can I reproduce a recording made on RL-R19 on a different RULA device?

Can I connect a gauge sensor to RL-R19?

See more FAQ

Product information

VisAnalyser

VisAnalyser