Ja jums jau ir konts, lūdzu, pierakstieties vai atjaunojiet savu paroli.
Ja jums nav konta, lūdzu, pierakstieties vai atjaunojiet savu paroli
Ja jums nav konta, lūdzu, dziediet vai pierakstieties, ja tāds ir.
Connect your controllers to an Ethernet hub that is plugged into your PC.
Pair the controllers using the first synchronization Ethernet port. Install a terminator stub in the second port to prevent possible errors.
You can create a common bus using up to 8 RL-C21 controllers. To do that, consult the schematic below:
Turn on your RL-C21 controllers and open RULA Software.
Go to the configuration tab and select hardware settings. Select both of your RL-C21 controllers and assign one of them to be a master device.
If you have any problems with syncing multiple RL-C21 devices, contact our 24/7 technical support per email or call +371 6610 2166.