Ja jums jau ir konts, lūdzu, pierakstieties vai atjaunojiet savu paroli.
Ja jums nav konta, lūdzu, pierakstieties vai atjaunojiet savu paroli
Ja jums nav konta, lūdzu, dziediet vai pierakstieties, ja tāds ir.
The configuration of RL-C21 system is flexible: it is determined by the user and can be modified at any time. The most innovative techniques of digital signal processing are embedded in the system. All calculations and safety checks are run by a DSP directly in the controller. This feature provides the highest level of shaker protection. The system enables running multishaker tests and successfully controls two- and three-axes shakers, as well as vibration shakers with up to 6 degrees of freedom. The presence of a galvanic isolation in the input chains allows effectively protecting input chains from breaks.
RL-C21 is used with a specialized vibration test software package TestUp и SignalUp.
Check the connection of Ethernet cable to the device and PC. Check if the device is loading. The words “RL-C21” should appear on the screen, and if you hold the “Stop” button for more than 3 seconds, it will display the information about the IP-address, serial number and the subnet mask. For a detailed step-by-step guide, consult this Knowledge article.
If the device IP-address is 0.0.0.0, and there is a [D] symbol next to the IP-address, hold the "Stop" button for about 1 minute to reboot the controller and reset factory settings.
Another thing to check in case TestUp does not see the device is whether Windows Firewall is enabled and whether there is an antivirus installed. They should be disabled.
The settings are saved to separate databases, and, having specified them once, you are able to use them for all subsequent tests.
SignalUp v12 (x86)
SignalUp v11 (x86)
TestUp - Release 58 (x86)
TestUp - Release 58 (x64)
TestUp - Release 58 (x86)
TestUp - Release 58 (x64)