RL-R19 DAQ system and spectrum analyzer is intended for measuring, registering and analyzing vibration data and other physical processes. RL-R19 enables the user to:

  • acquire and transfer data from vibration sensors.

  • examine the vibration condition of machines, mechanisms, mechanical constructions, bearings, gearings etc.

  • detect various defects of machines, mechanisms, mechanical constructions, bearings, gearings etc.

  • balance rotors of machines and mechanisms.

The principle of building up the software of RL-R19 devices enables forming a set of functional options intended to solve specific problems. The only obligatory option is “Basic Software”, other options may be combined in any configuration.

The following options are available:

  • Basic software (including making and viewing recordings).

  • Part-octave analysis.

  • Statistic analysis.

  • Balancing.

  • Signal generator.

  • Repeater.

  • Automatic measurements.

  • Filtration.

  • Shock analysis.

  • Synchronization.

Technical Features

Number of measuring channels 4 ÷ 8
Tacho-channel 1
Range of measure signals, V ±20
Frequency range of measured signals, Hz 0.1 ÷ 60000
Mode of measuring channels IEPE, linear, single-ended
FRF non-linearity at 1kHz, dB
in the range of 1 ÷ 40000 Hz
in the range of 0.1 ÷ 60000 Hz
 
≤ 2
≤ 5
DAC/ADC resolution, bits 24
Sensor type IEPE, linear
Logical inputs and outputs 4 inputs and 4 outputs
Screen resolution, bits 640 × 480
Screen diagonal, inches 5.7
Temperature range, °C -30 ÷ +60
Battery capacity, mAh ≥ 8000
Dimensions without handle, mm 260 × 152 × 55
Weight, kg 2.3
Protection IP65
Supply
Autonomous (> 8 hours)
230 V AC
12-36 V DC